Displays:

Engine run time

Battery Voltage

Throttle position %

Throttle position voltage

Engine Load

Horse Power

Injector pulse width

Injector duty cycle

Fuel pump duty cycle

Trans Temp

Engine torque

Fuel %

Boost (Cobra only, all other S/C vehicles require boost kit)

A1C-Ford Powerstroke Supported Parameters (PID'S)

BATTERY VOLTAGE- Alternator/battery output voltage

PULSE WIDTH- injector pulse width in msec.

ENGINE OIL TEMP

EX. BACK PRESS – Exhaust back pressure

ICP DC – Injector Control Pressure Duty Cycle

ICP – Injector Control Pressure

INJ. TIMING – Injector Timing Deg BTDC

CURRENT GEAR – Current Transmission Gear

Additional Features:
Annunciator feature allows shift lights to be used as warning lights.  Set any parameter to trip the lights above or below a preset value. Perfect as a trans temp, coolant, or oil pressure warning.

Universal code works on all 96-03 Fords.  User selectable paramaters allow only the specified parameters to be displayed.

Cyclical function allows the gauge to cycle through parameters at a given speed and duration.

Records up to 60 seconds of data. No need for a Laptop, you can datalog 2 parameters per gauge and play them back second by second. 

Read and clear trouble codes - clears "check engine" light.

Simply plugs into OBDII connector under the dash. Fits standard 2-1/16" gauge pods.

• RPM
• MPH
• Intake Air Temp 1
• Intake Air Temp 2
• MAF Counts
• Charge Temp
• MAF Flow
• Coolant temp
• Long Fuel trim B1 & B2
• Short fuel trim B1&B2
• O2 Sensor voltage B1 & B2
• Ignition advance
• Knock retard

INTAKE AIR 2- Intake Air Temperature taken at the throttle body inlet

COOLANT TEMP 2- Engine Coolant Temperature

RPM 2- engine Revolutions Per Minute

MANIFOLD kPa- Manifold Air Pressure (kPa)

BOOST – Boost Pressure

MILES PER HOUR 2- Miles Per Hour

TRANS TEMP- Transmission Temperature

RUN TIME MINS- engine run time since last engine start. Can be used as a trip timer.

HP adjustment allows even the highest modified vehicles to obtain accurate readings.

2 Analog inputs can be individually labeled and configured.

Each scan gauge displays two functions at once. Dual gauge kits also available.

Calculates MPG, ¼ mi, 1/8 mi ET's and, 0-60 times.

Adjustable dimming, reverse display, and data rate.

Remember: This will work right out of the box.  No external connections needed to monitor and record around 23 different things!  Just plugs into the OBDII connector under the dash.....That's it.  We carry sensors for things it doesn't monitor, but you do not have to add them.